 |
AUDIO SALES LINKS:
Tel: 0800 043 4600
|
Australian Monitor amplifiers To buy any items please call sales on 0800 043 4600
|
||
 |
SYNERGY SERIES SY400 200 + 200 @ 4 OHMS |
£please phone EX VAT & DELIVERY |
|
SYNERGY SERIES SY800 380 + 380 @ 4 OHMS Specifications - Power per channel @ 4 ohms, 0.05 THD: 375W - Bridge Power @ 8 ohms: 750W - Frequency Response <±0.1dB: 20Hz - 20kHz - Distortion (@ 4 ohms) THD @ 1kHz: 0.05% - Slew Rate: 30Vus - Damping Factor @ 8 ohms: >375 - Signal to Noise "A" Weighted: >100dB - Shipping Weight: 15kg - Dimensions HxWxD: 87x482x400 |
£please phone EX VAT & DELIVERY |
|
SYNERGY SERIES SY1200 600 + 600 @ 4 OHMS Specifications - Power per channel @ 4 ohms, 0.05 THD: 600W - Bridge Power @ 8 ohms: 1200W - Frequency Response <±0.1dB: 20Hz - 20kHz - Distortion (@ 4 ohms) THD @ 1kHz: 0.05% - Slew Rate: 30Vus - Damping Factor @ 8 ohms: >375 - Signal to Noise "A" Weighted: >100dB - Shipping Weight: 17kg - Dimensions HxWxD: 87x482x450 |
£please phone EX VAT & DELIVERY |
|
SYNERGY SERIES SY1600 800 + 800 @ 4 OHMS Specifications - Power per channel @ 4 ohms, 0.05 THD: 800W - Bridge Power @ 8 ohms: 1600W - Frequency Response <±0.1dB: 20Hz - 20kHz - Distortion (@ 4 ohms) THD @ 1kHz: 0.05% - Slew Rate: 30Vus - Damping Factor @ 8 ohms: >375 - Signal to Noise "A" Weighted: >100dB - Shipping Weight: 20kg - Dimensions HxWxD: 87x482x450 |
£please phone EX VAT & DELIVERY |
|
SY4200 200 + 200 + 200 + 200 @ 4 OHMS Specifications Y4200 - Power per channel at 4 ohms 200W - Power per channel at 8 ohms 132W - Power in bridge mode at 8 ohms 400W (channels C&D) - Frequency Response 15Hz-60kHz +/-3dB - Distortion <0.03% - Input Sensitivity 1Vrms - Voltage Gain 28.3 - Slew Rate >40V/usec - Damping Factor >400:1 - Signal to Noise 97dB - Input Impedance 20kohm - Input clipping +20dBV - Cooling Front to Back - Amplifier Indicators Power, Status(Signal/Clip), - Overload, Thermal, Fault - Amplifier Controls Volume, Ground Lift, Bridge - Switch, Low Pass Filter, Limiter - Amplifier Protection Current Limiting, DC Protection, - mains fuse, DC rail fuses, Slow - Start, Thermal Cutout - Low Pass Filter 125Hz 18dB/oct (channel C) - Dimensions 87x482x400 HxWxD mm - Net weight 12kg - Shipping weight 14kg - Shipping dimensions 210x540x470 HxWxD mm |
£please phone EX VAT & DELIVERY |
|
SYNERGY SERIES SY61250 125 + 125 + 125 + 125 + 125 + 125 @ 4 OHMS - Power per channel at 4 ohms 125W - Power per channel at 8 ohms 85W - Power in bridge mode at 8 ohms 250W (channels B+C, D+E) - Frequency Response 15Hz-80kHz, +/-3dB - Distortion <0.03% - Input Sensitivity 1Vrms - Voltage Gain 22.3 - Slew Rate >40V/usec - Damping Factor >250:1 - Signal to Noise 97dB - Input Impedance 20kohm - Input clipping +20dBV - Cooling Front to Back - Amplifier Indicators Power, Status(Signal/Clip), - Overload, Thermal, Fault - Amplifier Controls Volume, Ground Lift - Amplifier Protection Current Limiting, DC Protection, - mains fuse, DC rail fuses, Slow - Start, Thermal Cutout - Low Pass Filter frequency and slope 125Hz 18dB/oct (channels B+E) - Net weight 15kg - Shipping weight 17kg - Dimensions 87x482x450 HxWxD mm - Shipping dimensions 210x550x550 HxWxD mm |
£please phone EX VAT & DELIVERY |
AUDIO LIGHT SYSTEMS ARE MAIN AUSTRALIAN MONITOR DEALERS.
THE ABOVE MICROPHONES ARE JUST A SMALL SELECTION OF THE AUSTRALIAN MONITOR RANGE, PLEASE CALL 0800 043 4600 FOR PRICING ON MORE MODELS. The images and specifications above are to give an overview of the design intent for the systems and components. They may not be the actual equipment supplied. Please contact Audio Light Systems for actual specifications, images and up to date costings. e&oe. |
||
