Audio Light Systems Ltd - Sennheiser conference systems

CONFERENCE SYSTEM LINKS:

Tel: 0800 043 4600

Sennheiser conference systems To buy any items please call sales on 0800 043 4600
	SENNHEISER SDC CU Master station The SDC CU central unit is designed to control conference systems with up to 150 conference terminals. Three cable lines with 50 terminals each can be connected to the unit via CONFERENCE BUS OUT I-II-III. Its internal PSU powers up to 25 conference terminals (larger systems require additional power supply units). Up to four central units can be linked with system cables to create conference systems for up to 600 participants. Features Central unit controls up to 150 conference terminals Four central units can be cascaded for systems with a maximum of 600 terminals Three cable lines with up to 50 terminals each per central unit Internal PSU for powering up to 25 conference terminals Three conference modes: "Automatic", "Request" and "Overrun" XLR Audio Out (line) for conference channel XLR Audio In switchable between line and mic 11 analogue line inputs for interpreter channels 2 analogue line outputs for conference channel plus 11 interpreter channels RS 232 connector for PC control	£please phone EX VAT & DELIVERY
	SENNHEISER SDC 3000 D Delegate/chairperson Unit The SDC 3000 D is an extremely easy-to-use conference terminal. It features a built-in loudspeaker and electret microphone, ensuring excellent sound reproduction throughout the entire conference room. The unit is controlled via the MIC key. By pressing this key, for example, the participant can activate the microphone or "apply" to take the floor. A red LED ring on the microphone indicates who is allowed to take the floor or who has applied for a comment. In Voting Mode, the unit's three keys are assigned yes/no/abstention. A simple change in configuration at the SDC CU central unit is all that is needed to turn the delegate unit into a chairperson unit. Two control keys which are otherwise inactive will be assigned special functions. Features Conference terminal with built-in permanently polarized microphone and loudspeaker Gooseneck microphone with LED ring Microphone key with LED Terminal can be used as a delegate unit or – by altering the configuration – as a chairperson unit Voting function (yes/no/abstention) Headphone output (fixed volume)	£please phone EX VAT & DELIVERY
	SENNHEISER SDC 3000 DC Delegate/ chairperson Unit The SDC 3000 DC is an extremely easy-to-use conference terminal. It features a built-in loudspeaker and electret microphone, ensuring excellent sound reproduction throughout the entire conference room. The unit is controlled via the MIC key. By pressing this key, for example, the participant can activate the microphone or "apply" to take the floor. A red LED ring on the microphone indicates who is allowed to take the floor or who has applied for a comment. In Voting Mode, the unit's three keys are assigned yes/no/abstention. A simple change in configuration at the SDC CU central unit is all that is needed to turn the delegate unit into a chairperson unit. Two control keys which are otherwise inactive will be assigned special functions. The SDC 3000 DC features a switchable interpreter channel which can be listened to via the headphone socket. A total of 11 channels are available for translations. The language is chosen with the SELECT key, the headphone volume can be individually adjusted with the VOLUME key. Features Conference terminal with built-in permanently polarised microphone and loudspeaker Gooseneck microphone with LED ring Microphone key with LED Terminal can be used as a delegate unit or – by altering the configuration – as a chairperson unit Voting function (yes/no/abstention) Headphone output with volume control Conference channel plus 11 interpreter channels available at the headphone output LC display for volume and selected channel	£please phone EX VAT & DELIVERY
	SENNHEISER SDC PS25 Power supply unit The SDC PS 25 power supply unit powers up to 25 SDC 3000 D or SDC 3000 DC conference terminals. It is required for conference systems with more than 25 terminals (up to 25 terminals are powered directly by the SDC CU central unit). The SDC PS 25 can be connected anywhere in a cable line. Features Powers up to 25 conference terminals Serves as a repeater for the Conference Bus data Connection via SDC system cables Mains LED	£please phone EX VAT & DELIVERY
	SENNHEISER SDC SYS control software The SDC system software enables you to configure and control the entire SDC 3000 system via PC. Large conferences can be conveniently controlled via graphical user interface and mouse. The software is copy protected by a dongle. Minimum system requirements: - 450 MHz processor (Intel Pentium or AMD Athlon) - 64 MB RAM (128 MB RAM recommended) - 20 MB available hard disk space - CD or DVD-ROM drive - images card, 15" TFT screen or 17" monitor with a resolution of at least 1024 x 768 pixels - a USB or parallel port for the copy protection dongle - a serial port for connection to the SDC CU central unit - Microsoft Windows 2000, NT, 98, 98 SE or 95 Features Displays the seating plan and the names of all participants Indicates the status of the conference terminals (microphone on/off/muted) Displays the participants who have "applied" to take the floor Chronological list of the last nine speakers Displays the remaining speaking time (if a maximum speaking time has been chosen) Indicates date and time For creating and storing any seating plans and system configurations For determining who is allowed to take the floor and passing on the "speaking rights" Software starts the voting mode, displays and stores results Modification of audio settings during operation	£please phone EX VAT & DELIVERY
	SENNHEISER SDC system cables The system cables are required for interconnecting the delegate units and if necessary external power supplies and for connecting the cable strings to the central unit. The system cables are available with lengths of 2 m, 3 m, 5 m, 10m, 20 m and 80 m. Via the 2 m and 3 m long system cables, you can: interconnect the delegate units, connect additional power supplies to the cable strings with the delegate units, interconnect up to four central units for setting up a large conference system. Via the system cables with lengths of 5 m, 10 m, 20 m and 80 m, you connect the cable strings to the central units	£please phone EX VAT & DELIVERY
Please contact the sales office on 0800 043 4600 to confirm your exact sales requirements, but many guide prices are available if you follow the links to the left. All quoted prices are guides only, and subject to confirmation. The images and specifications above are to give an overview of the design intent for the systems and components. They may not be the actual equipment supplied. Please contact Audio Light Systems for actual specifications, images and up to date costings. e&oe.